Categories
Architecture and Design homework help

What Is Hempcrete?

What Is Hempcrete?
Hempcrete is a composite made of natural materials, lime and hemp. The lime component consists of air lime that is formulated to speed up the setting process. The hurds are made using hemp stalks. Hemp is a plant that can be grown without using plant protection chemicals, requires little water and contributes to agricultural soil regeneration. The combination of lime and hemp creates a natural concrete which is lightweight, or ultra-lightweight even. Its thermal mass and vapour permeability properties result in high-performance buildings capable of meeting current and future thermal regulations.
Advantges of Hempcrete
It is resistant against mold as well as it is a moisture absorbent. It allows for natural ventilation of the building. It provides excellent acoustics. It is light weighted and moreover, it is environmental friendly too.
Disadvantges of Hempcrete
Hempcrete walls are thicker in size as compared to other walls which reduce the carpet area.
Hempcrete has low compressive strength.
It also has low elastic modulus which makes it unsuitable for direct loads.
It cannot be used for heavy loads, it requires frames to carry loads.
Appliction of Hempcrete
Hempcrete is made from lime and hemp shivs (a waste product from hemp fiber growing); it can be used for walls, floors, and for roof insulation; it’s breathable, absorbing and emitting moisture to regulate internal humidity and avoid trapped moisture and mold growth.
Uses of Hempcrete
As external and internal Wall insulation.
As floors and roof Insulation.
Underneath floors.
As Plasters.
New Builds.
For Insulating older buildings.
Renovation.
What Is Considered a Flight of Stairs?
Have you ever heard of a “flight” of stairs? This term is defined as an uninterrupted series of steps. This can mean the set of stairs between floors or those between landings. There’s really no set rule for what can be called a flight of stairs.
Uses of Flight of Stairs
The primary purpose of stairs is to provide a simple and easy means of moving between levels. In ancient times, houses and shelters were made up of only one storey, but it was realised that the area above ground level could be utilised to increase the amount of space a structure could offer.
How Many Stairs Are in a Flight?
If you’ve ever wondered how many stairs are in a flight, a flight of stairs has 13 to 16 steps on average based on today’s ceiling heights in most residential buildings and the type of staircase.
Types of Stairs
Straight. This one is straightforward (literally).
L-shaped (a.k.a. quarter-turn) The classic straight style, zhuzhed up a little.
Winder. The slightly more complicated sister to the L-shaped staircase.
U-shaped (a.k.a. half-turn)
Spiral.
Curved.
Bifurcated.
Ladder.
Flight of Stairs Definition
Why is it called a “flight” of stairs, anyway? “Flight” is likely a metaphor for a journey upward—only using the feet instead of wings! The next time you run up a flight of stairs, think of yourself as “flying” up them.
What Is The Classic Queen Size Bed Dimensions In Feet?
Standard queen bed dimensions are 60 inches by 80 inches, or 5 feet by 6 feet, 8 inches.
What is the Size of a Queen Bed Frame?
A standard queen size bed measures 60 inches wide by 80 inches long. Compared to other bed sizes, queen-size bed dimensions are less than a king-size bed and more than a full-size bed; a king-size bed measures 76 inches wide by 80 inches long, and a full-size bed measures 54 inches wide by 75 inches long.
Mattress Sizes Chart and Bed Dimensions Guide
Apart from the texture and feel, there is another very important facet of your mattress which influences your choice—the size. Getting the right size mattress is one of the crucial determinants leading towards the ultimate goal of a good night’s sleep.When looking for a new mattress, choosing the right size from a plethora of options can be difficult, especially when there are sub-categories in certain segments. With very little difference in dimensions between certain sizes, getting the right fit for yourself can be a daunting task.
Queen Size Mattress Dimensions
Selecting the right bed size is a huge part of the mattress-buying process. But while many people will want to stick with the same mattress size as they had before, others may have undergone lifestyle changes that warrant something bigger or smaller.For instance, are you an active sleeper? Do you have animals or children sharing the bed with you? Do you have a partner? Or maybe your bedroom size has changed. Does that mean your mattress size should change as well? These are just a few of the simple questions to ask yourself when deciding what mattress size is right for you.
Dimensions On Queen Size Bed
SizeDimensionsTwin38″ x 75″Twin XL38″ x 80″Full (Double)54″ x 75″Queen60″ x 80″
Zero Force Members
If a joint has only two non-collinear members and there is no external load or support reaction at that joint, then those two members are zero- force members. In this example members DE, DC, AF, and AB are zero force members. Again, this can easily be proven.
How to identify zero force members in trusses
If a joint has only two non-collinear members and there is no external load or support reaction at that joint, then those two members are zero- force members.
truss learning Objectives
To develop reliable monitoring systems and structural, material and loading models to be achieved through research that will contribute to the sub-objectives: more efficient infrastructure design, assessment, monitoring and management.

Categories
Architecture and Design homework help

Explain balance with examples in architecture and interior design.

What is balance?
Explain balance with examples in architecture and interior design.
Draw the different types of balance using shapes, in your journal.
Expand on  your own critical thought of balance and decide which type of balance are you more inclined to be attracted to?

you will begin to write thoughts, opinions, reasoning, understanding and verified research on the following topics. Your writings should be free-flowing but insightful as you explore these topics. You may use collage and hand drawings in your journal to better relate your thoughts about the topics. Be creative but, be mindful of refinement and restraint with your journal. It is a repository of your thoughts but it is also considered a design project.
If you are writing FOUR sentences on each topic you have already completed the assignment incorrectly!

TIPS
While doing this  assignment, remember:
Dig deeper on  research.
Bring your own critical thoughts and findings.
Explore and be mindful about your journal layout.
Label and explain your thoughts on each image.
Follow assignment instructions.

Categories
Architecture and Design homework help

What Is Septic Tank?

What Is Septic Tank?
“Septic” or “septic” typically is used to describe the anaerobic bacteria environment that was created in Tank and decomposes to mineralizes domestic wastewater in the tank.
What exactly is septic tank Septic tank? It is a constructed in a scientifically sound underground chamber typically made of rcc, fiberglass, plain concrete, steel, or plastic. the domestic water, wastewater and fecal materials, excretory and toilet products flow into it to treat the primary source of waste material , which decomposes and transform into semi-solid or solid settleable liquid sludge.
In the United States, there are several types of ready-made Septic tanks that are available in the market. They include concrete septic tank plastic septic tank, as well as fibreglass septic tanks. Most well-known and widely used are concrete septic tanks for homes, based on the state and local rules and regulations.
When it comes to “what is a concrete septic tanks?”, concrete septic tank is a basic design, water-tight container constructed from RCC or plain concrete typically rectangular or circular in shape and available in one chamber, two chambers, or three chambers that are that are used to treat primary liquid waste.
The typical capacity ranges from 500 to 1250 gallons 500 gallon or 750 gallon tanks are adequate for a two-bedroom home or a 1000 gallon concrete tank is sufficient for a three bedrooms, and a 1250 gallon septic tank is sufficient for a four bedroom house or a family of four.
In this regard, “what is the septic tank?”, the septic tank is a single chamber or multi-chamber underground compartment that is composed out of RCC concrete fiberglass, plastic or steel used for the first-class treatment for domestic wastewater and fecal material as well as excretory products and toilets that
Also Read: Rooftop Design Ideas
What Are Septic Tank?
What is the septic tanks? Septic tank is an submerged sedimentation tanks for the primary treatment of household waste and fecal materials via the process of bioanaerobic digestion, or decomposition, which results in semi-solid or solid sludge that can be settled.
The majority of septic tanks for homes can hold between 4000 and 7500 millilitres or 1,000 – 2000 gals of effluent, or semi-solid sludge.
What Size of Septic Tank Do I Need?
In this article, we’ll be talking about underground septic tanks and the size is a reference to the tank’s total capacity for handling. Read our article about above ground septic tanks to get additional information about these tanks and the systems.
The minimum requirements for capacity of a septic tank are based on various variables. The state, county or city guidelines may require approved sizes , as can the material used for tank construction and its installation.
The local geography and soil conditions play a significant role in the effectiveness of the system, which could affect the size of drain fields and the size of the septic tank.
The type of septic tank intended for commercial or residential usage will impact the its size as per the guidelines; in this article, we’ll examine home usage. The specific system of septic tanks installed or to be put in place can alter the size of the tank required.
In essence the size of the septic tank required will be contingent of: (1) the specific kind of septic system; (2) the local regulations of government; (3) suitability of the soil geology in addition to (4) the anticipated volume of wastewater , based on the dimensions of the house.
Also Read: Viking or Wolf
How Does a Septic Tank Work?
A septic tank is any of one of three, two or four compartments, typically fourth compartment of the septic tank is used as a soak pits for water to run off and then goes into the soil. It is the first compartment that is used to receive waste water, second and 3rd compartments are utilized for anaerobic digestion waste.
The septic tank’s one end is connected to waste inlet water pipe. The other is connected with outlet pipe to allow overflow of water. Usually, pipes are with a T-shaped design, that allows waste water to pass through and stay there without disturbance.
What exactly does a septic system function?, a system of septic tanks work by anaerobic digestion, or decomposition of waste water and fecal matter through the actions of a variety of microorganisms like bacteria, which disintegrate it, and change the waste into a settleable semi-solid or solid sludge. Waste water flows into the primary chamber of the tank, which allows solid to settle, and scum to rise.
The solids that settle are then digested by anaerobic digestion, which decreases the amount of solid. The liquid component flows over the walls to divide it to the Second Chamber, where further settlement takes place . The surplus liquid that is now clean and dark colour comes out of the outlet pipe. It is pumped into the sewage or soak pit.
Also Read: How Many Bags of Concrete Per Fence Post

Categories
Architecture and Design homework help

 How does Inverter Generator Work?

How Does Inverter Generator Work?
If you’re withinside the marketplace for a brand new generator, you’ve possibly observed through now that there are numerous special forms of generator – standby, transportable, widespread, inverter, and on and on. With such a lot of terms, it’s smooth to get lost.
Fortunately, your buddies at WEN are right here to assist clean matters up. We have an intensive line of inverter turbines, ranging in length from 1250 watts all of the manner as much as 3800 watts.
To give an explanation for what an inverter generator is and the way it works, let’s start with a short evaluate of the way all turbines produce strength. Generators have essential parts – an engine and an alternator.
The engine consumes a fuel, like fuel or propane, and turns a shaft. The alternator has essential components – a rotor and a stator. The engine shaft turns the rotor, which induces strength withinside the stator. This strength is going to the manipulate panel, wherein it’s far used to strength something you want – strength tools, appliances, and greater.
In a conventional generator, the strength produced through the alternator is fed (greater or less) immediately to the manipulate panel. It may fit via a voltage regulator or different protecting gadgets, however the strength isn’t necessarily “wiped clean up”.
Also Read: Measuring Devices
Therefore, the strength produced through a conventional generator has a better general harmonic distortion (THD) than the strength produced through an inverter generator. THD is a degree of the way smooth the strength is – greater on that during a moment.
An inverter generator works differently. The alternating current (AC) strength produced through the alternator is despatched to a rectifier, that’s a tool that converts the AC strength to direct current (DC). This DC strength is then inverted returned to AC strength through the laptop in the generator earlier than it’s far despatched to the manipulate panel.
This is wherein the name “inverter” comes from. Because the strength to the manipulate panel is managed through the laptop, inverter turbines provide a good deal decrease THD than widespread turbines. THD is an crucial attention while powering touchy gadgets, like smartphones, tablets, computers, and televisions.
These gadgets expect “smooth” strength (strength that has low THD, just like the wall strength for your home), and may be broken in the event that they acquire excessive-THD strength. All WEN inverter turbines use pure-sine-wave inverters, and as such, restriction THD to below 1% in maximum cases. Traditional turbines can produce THD as excessive as 25% in a few cases.
Also Read: What Does Service Battery Charging System Mean
Inverter turbines are commonly greater compact than conventional turbines, and are a good deal quieter, however have decrease most strength outputs and are greater expensive. There are essential sub-forms of inverter turbines: closed-body and open-body. Closed-frames are the maximum compact form of inverter generator, in addition to the quietest.
Their protecting shell consists of noise-soaking up insulation, drastically decreasing their acoustic impact. They are typically transportable and appropriate for powering small loads.
Open-body inverter turbines haven’t any such insulation, and consequently are louder than closed-frames, however are nevertheless quieter than widespread turbines – typically approximately 50% quieter. Open-body inverter turbines produce strength this is simply as smooth as closed-body inverters, and can be able to dealing with large loads.
Ultimately, the proper generator for you relies upon for your needs, such as the forms of gadgets you need to strength, how a good deal strength you want, applicable noise degree and greater. But regardless of your want, WEN has a generator to in shape you.
If you’ve got got any questions or want assist deciding on the generator that’s proper for you, sense unfastened to provide us a name at 1-800-232-1195 (M-F 8AM to 5PM CST) or drop us a message at orders@wenproducts.com to talk with our pleasant and informed technical aid team.
Also Read: Parts of a Car Wheel and Axle

Categories
Architecture and Design homework help

What are the advantages of hempcrete?

What Is Hempcrete?
Hempcrete, also known as hemplime, is a biocomposite materialthat is a blend consisting of hemp hurds (shives) as well as lime, also known as pozzolans, that is utilized as a construction material and insulation. It is sold under various names such as Hempcrete, Canobiote, Canosmose, Isochanvre and IsoHemp.
Hempcrete is much easier for use than conventional lime mixes, and serves as an insulator as well as a moisture control. It does not have the brittleness of concrete, and therefore doesn’t require expansion joints.
It is a light insulation material that is suitable for all environments because it is able to combine the thermal mass and insulation.
Also Read: Flight of Stairs
How Strong is Hempcrete?
The force of hempcrete can be a fraction of the strength of concrete, which comes at 1 MPa, which means it’s not suitable as a base material, or in any situation that require it to bear loads.
It is resistant to cracking because of its low density. This makes it an appealing alternative to zones that are susceptible to earthquakes.
Hempcrete also breathes and allows the moisture to evaporate (no mold) it does not emit off-gas and is a safe choice for termites. The non-toxic, lightweight characteristics of hempcrete make it is simple to move around on a job site.
While hempcrete has been increasing in popularity but it’s not readily available. However, it has similar costs to other insulation options, and is expected to increase in price as the production volume increases.
Also Read: Queen Bed Dimensions in Feet
Insulating using Hempcrete
The pulpy wood of hemp plants can also provide numerous possibilities for the green building industry. The majority of houses located in the United States rely on fiberglass insulation, which is a mix of recycled glass and plastic. However, research has revealed the fact that 9 of 10 households in the United States are also not properly insulated.
Insuring that our homes are well-insulated is a crucial strategy to increase efficiency in energy use. There are many better insulation products available that are available, ranging including wood-based insulation and wool-based insulation that is made from wool from sheep.
When combined with lime (as binding agent) and water hemp’s woody pulp provides a viable alternative to fiberglass insulation.
Prince Charles of the United Kingdom recently constructed the “Natural House” which is entirely built from wool from sheep as well as hemp insulation. It’s heated by only one wood stove.
What are The Advantages of Hempcrete?
Hempcrete breathes, which allows the moisture to evaporate (no mold) It does not emit off-gas and is not a target for termites.
The non-toxic and light properties of hempcrete make it’s easy to move around on a job site. Hempcrete doesn’t shrink and retains its constant temperature and also increases in strength as time passes.
What are The Disadvantages of Hempcrete?
Although this might not count as a major drawback, hempcrete can’t be utilized as a base because of its poor compressive strength. In the majority of cases, it is not a suitable material for load bearing.
An idea that requires the lightweight foundation can make use of hempcrete in lieu of concrete, if it is adhered to the local building codes and is endorsed through an engineer.
While research and development regarding hempcrete’s potential use are in the early stages but preliminary findings are positive.
Also Read: Zero Force Members

Categories
Architecture and Design homework help

What is the programming?

Your new clients:
The Wagner’s – Scott and Ella are a young married couple who just purchased a
townhome in the Heights area of Houston.  He works in finance, and she is a Dr. They
prefer clean lines, not a lot of “fluff” but want their home to be comfortable and inviting.
The bedroom and bathroom need to have a relaxing “get away” feel as they both work
long hours. They have no children.
Develop and Prepare (3) Written Design Concepts for a Master Bedroom Suite – You
must use the “What, Why & How” Method presented in class
project will have its own unique Design Concept
You will use your Design Concepts to make selections and provide an overall design
scheme for each client
You will find images of all of your selections and include in your presentation
You will create (3) Schemes and present in a digital format.
Design/Presentation requirements are below:
Bedroom Materials/Finishes: Ceiling/Walls/Floors/Window Treatments
Bedroom Furniture Selections: Bed, Nightstands, Dresser, Art/Accessories, TV
Bedroom Light Fixtures
Bathroom Materials/Finishes: Ceiling/Walls/Floors/Millwork (counter & cabinets)
Bathroom FF&E Selections: Tub, Sinks, Shower & Sink Fittings, Lighting
Remember, you need to think about how you would like the bedroom to function,
and what your “concept” would be.  Think about seating areas, sleeping area,
storage, dressing area, etc.  This is your opportunity to be creative!
What is your concept statement? What is the programming? (Here are some questions
to ask)
 What size bed?
 What types of furniture needed? (Headboard, dresser, lounge chair, rug, etc.)
 Comfort level and design style (contemporary, traditional, transitional)
 Lighting and TV requirements?
 Accessories?
You will:
 Take the plan that was given to you and research and decide what furnishings
you would like to propose for each client.
 Create a Programming slide identifying needs and requirements and your
solutions.
 Create a brief Concept Statement slide summarizing your design intent. This
statement should also communicate the mood or feel you are attempting to
evoke.
 Create a “working” presentation of your suggestions to review. This will consist of
several slides with your suggestions.

Categories
Architecture and Design homework help

Describe a common and measurable collaborative group goal.

Week 4 AssignmentWeek 4 Assignment: Group Project Plan
Due: Week 4
Points: 85FORMATIVE ASSESSMENTCriteria for Success: You will begin work on your group project this week as you:

Describe a common and measurable collaborative group goal.
Establish the members of your group.
Define the roles and responsibilities of each group member.
You will work toward your goal over the next two weeks and reflect on the collaborative strategies used in your final assessment document during Week 6.Click here to review the assignment for Week 6.What to submit/deliverables: A completed Group Project Plan.What you need to complete this assignment: To complete this assignment, you will need the following resources:
Assignment Overview Video.
Group Project Plan Document [DOCX]
Steps to Complete: In Week 4, complete and submit your assignment in BlackBoard using the following steps:STEP 1: Describe a common and measurable collaborative goal. This is not an individual goal it is a group goal. This can be a goal the group is already working on at work, at school, or at home. The group should be able to accomplish this goal in two weeks (or a sub-goal if you are working on a longer-term goal) during Weeks 4 and 5 of this course.Here are some examples of common goals you may decide to work on:
Organizing a room in a home or apartment.
Cooking a new dish or elaborate meal.
Creating an art project (e.g., mural, sculpture, drawing, et cetera).
Putting together a crowdfunding idea.
A project at work you have to complete.
A virtual party or get together.
Planning a safe social event.
A health or fitness goal.
A plan for staying connected with someone.
An environmental clean-up project in your community.
Volunteer efforts such as a book drive, food drive, et cetera.
STEP 2: Identify the other 2–4 members of your group and how you will work together. You may work with family members, friends, classmates, co-workers, or anyone else you will be able to collaborate with during this time period. Collaboration should be accomplished through strategies and tools. Collaboration strategies or approaches can include in-person meetings, active listening, phone conversations, organization, sub goals, etc. Collaboration tools can include Google Docs, Monday, Zoom, Skype, Smartsheet, Microsoft Teams, Slack, Microsoft Office 365, et cetera. Make a plan for how your team will collaborate (using strategies and tools) and what each specific person’s role and responsibilities will be.STEP 3: Download the Group Project Plan Document [DOCX] and complete all sections.STEP 4: Upload the completed document to the Assignment 2 link in Week 4 of Blackboard.Assignment Help Video: Week 4 Assignment 2 OverviewInteractive Assignment WalkthroughIf you’d like to work on your assignment while watching the help video, click on the interactive video below. As you watch the video, you’ll be able to answer the questions along the way. After you have answered each of the questions and reach the end of the video, you will download a Word document with your answers. Then, you will submit your completed document to Blackboard for grading.If you need help, check out the PlayPosit Help Document PDF .If you are using a mobile device, please use this link.

Categories
Architecture and Design homework help

How much actual competition occurs in perfectly competitive markets?

W11 Discussion
3131 unread replies.3131 replies.
Topic:
The market structure of perfect competition has a lot of ideal qualities–hence the name perfect. For example, perfectly competitive firms are productively efficient, and perfectly competitive markets are allocatively efficient. It is, however, difficult to find many examples of perfectly competition in the real world. Perfect competition is really a benchmark against which we compare other market structures in the real world.
How much actual competition occurs in perfectly competitive markets? Some make the claim that there is actually no competition between firms in a perfectly competitive market.
Do you agree or disagree with this claim? What is your reasoning?
Directions:
Post your initial reply to the topic above by Thursday evening at 11:59pm.
Read through the other entries and reply directly to at least two classmates by Sunday evening at 11:59pm.
Please make a substantive contribution to the discussion; short replies such as “I agree” will not earn full points. When you reply, make sure to use professional grammar and punctuation.

Categories
Architecture and Design homework help

Would you use mailed questionnaires, telephone surveys, personal interviews, or a web-based survey? Why?

150 words
Would you use mailed questionnaires, telephone surveys, personal interviews, or a web-based survey? Why?
Write 2 closed and 2 open-ended questions that you could include in the survey
What specific diversity considerations might be important when selecting survey participants for this research?

Categories
Architecture and Design homework help

Explain in a short summary of at least 3 complete sentences what and why you selected your furnishings and how they relate to your client.

Instructions: Space Planning
• Select a style and theme for your space – Contemporary, Modern, Traditional, Transitional, French Country, Spanish, English etc.and then create a furniture plan for this master bedroom
• Furniture must include but not limited to: King bed, dresser, 2 nightstands
• Floor plans can be made using the STAR FURNITURE Room Planner application
• Explain in a short summary of at least 3 complete sentences what and why you selected your furnishings and how they relate to your client.
• Copy and paste your completed room to a slide when done
• Powerpoint must include: Title Slide with name, slide with short summary and slide with floorplan – 3 slides max!